NEWS
The maintenance of the feeder includes 2 aspects: routine maintenance and regular inspection:
The first aspect of routine maintenance mainly focuses on 6 aspects:
1, segment the gear, roll, apply the butter, and add gear oil to the gear replacement.
2, if there is dirt, roll, whether there is foreign gear?.
3, loose between the screw and nut mechanism.
4, feeding machine roller parallelism is good.
5, part of the abnormal damage, deformation, etc..
6, the switch and display panel is abnormal.
Second, regular inspection
Homework, every 6 months or 1000 hours of use, should be the implementation of this examination.
1 、 whether the external wiring of the feeder is deformed, damaged, leakage or short-circuit conditions.
2, the operation panel button, the contact is conductive, whether there is oil adhesion.
3, each contact point, the control panel relay is good.
4, NC servo system is often accumulated dust, environmental temperature is too high.
5, feeding machine in the electric control box, cooling fan, in order to prevent overheating of the motor, the cooling fan filter is used to protect the fan from dirt, but if the filter is blocked, the function of the cooling fan, control box temperature rise, causing damage to the triode.