Introduction： Material width: 400-1300mm
Material thickness: 0.3-3.2mm
Standard configuration:
1. photoelectric arc control system;
2. feeding roller correction roller, hard chromium plating;
3. feed guide rack device;
4. press arm device;
5. feeding line height electric regulating device;
6. material arc control roller;
7. roll head flattened feeding device;
8. material rack frequency conversion speed regulation;
9. material rack oil pressure expansion device;
10. material rack support arm device.
Purchase configuration:
1. hydraulic automatic feeding trolley;
2. roller full drive device;

3. double face oiling device.

The stress at the point of stress in the upper table is 275N/mm2 (tensile strength 400N/mm2)
The, above, figures, are, material, having, yield, strenggth, of, 275N/mm2, (Tensile, strength, of, 400N/mm2)
Specifications and appearance due to improvements may change without notice