PRODUCT
Introduction:
Material width: 200-600mm
Material thickness: 0.15-1.5mm
Characteristic description:
1. open eccentric wheel design, the upper roller seat all open, easy to pass through and operation when feeding;
2., the upper roller seat can be lift type design, easy to clean and maintain the roller;
3. 、 adopt Japanese bearings, with high precision and long service life;
4. roller material using bearing steel (SUJ2), high frequency heat treatment, HRC60 degree of hard chromium, high hardness, wear sand, long life;
5., up and down straightening roller total of 19, full drive design, for the thin material leveling and stress elimination, to play the best effect.
6., the upper working roller adopts 4 point type micrometer adjusting device, which can be adjusted quickly, and is suitable for the processing quality requirement with higher leveling precision. It can be used with any feeder.